Tax Deduction Info on www.Section179.Org!

BLOG

Quick Color Changes in under 30 seconds

I learned to powder coat back in 1986 on an old powder coating unit with square hoppers. Back then we didn’t have any fancy equipment to help us powder coat, much less change colors, so if we wanted to go faster we had to work faster. One of the biggest challenges I faced when I was coating, which still seems to be the challenge of almost every shop I go into today….Color Changes!

There are basically two styles of powder delivery methods for application guns, the Fluidizing Hopper and the Box Feeder, both of these methods work extremely well at delivering powder to the powder gun.

The Fluidizing Hopper is a tried and true method where compressed air is used to suspend powder inside the hopper to be picked up and sent out to the gun. This method allows the powder to be constantly conditioned with clean dry air, which is ideal for powder delivery and application. While the delivery method of powder to the gun is quick and easy, performing a color change with a fluidized hopper is sometimes not so quick and easy as you have to dump any unused powder back into the box and clean out the hopper for the next color. This task usually takes anywhere from 5-15 minutes depending on how large the hopper is and how thoroughly it’s cleaned out.

The other proven method is the Box Feeder. These work very well and allow for fast and easy color changes, however, powder doesn’t always fluidize consistently and evenly over long periods of time. This can be problematic with long runs of powder or in hot/humid areas, and you find yourself constantly kicking the box or running your hand through the powder coating so the gun will spray properly.

Husker Finishing Equipment  has come up with a solution that offers the best of both worlds…..The ColorBOARD.

The ColorBOARD let’s you do a color change in under 30 seconds and can be used with 2 powder coating guns and up to 6 colors! Multiple ColorBOARD’s can be hooked together for more colors.

Contact Us Today at 888-647-9929 or sales@buyritefinishing.com to LEARN MORE about how the ColorBOARD can save you time and money!

This entry was posted in Buy Rite Finishing, Clean Room, Colorboard, Conveyor Systems, Environmental Room, Installation/Removal Services, Modular Office, New Powder Equipment, Powder Coating, Powder Coating Guns, Powder Coating Hoppers and tagged , , . Bookmark the permalink. Follow any comments here with the RSS feed for this post. Trackbacks are closed, but you can post a comment.

Post a Comment

Your email is never published nor shared. Required fields are marked *

*
*